Minnesota Administrative Rules
Agency 222 - Plumbing Board
Chapter 4714 - PLUMBING CODE
Part 4714.0903 - MATERIALS

Universal Citation: MN Rules 4714.0903

Current through Register Vol. 48, No. 39, March 25, 2024

UPC section 903.1 is amended to read as follows:

903.1 Applicable Standards. Vent pipes and fittings shall comply with the applicable standards referenced in Table 701.1, except that:

(1) Galvanized steel or 304 stainless steel pipe shall not be installed underground and shall be not less than 6 inches (152 mm) aboveground.

(2) ABS and PVC DWV piping installations shall be in accordance with the applicable standards referenced in Table 1401.1.

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.