Minnesota Administrative Rules
Agency 174 - Pipeline Saftey Office
Chapter 7535 - MODEL PIPELINE SETBACK ORDINANCE
Part 7535.0500 - MODEL SETBACK ORDINANCE

Universal Citation: MN Rules 7535.0500

Current through Register Vol. 49, No. 13, September 23, 2024

Subpart 1. Purpose.

The purpose of a model setback ordinance set out in this part is to increase public safety by requiring that new development be set back from pipeline locations.

Subp. 2. Applicability.

This ordinance applies to new residential and other development. It does not apply to development that has occurred or for which development permits have been issued before July 1, 1991.

Subp. 3. Setback.

Buildings and places of public assembly subject to this ordinance shall not be constructed closer to the pipeline than the boundary of the pipeline easement.

Subp. 4. Variances.

Variance procedures adopted by the local unit of government under Minnesota Statutes, sections 366.10 to 366.19, 394.21 to 394.37, or 462.351 to 462.365, shall apply.

Statutory Authority: MS s 299J.05

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.