Minnesota Administrative Rules
Agency 171 - Public Safety Department
Chapter 7511 - FIRE CODE
Part 7511.8430 - SYMBOL DESIGN
Universal Citation: MN Rules 7511.8430
Current through Register Vol. 48, No. 39, March 25, 2024
Subpart 1. Design.
The required warning symbol must be of a design illustrated as follows:
Subp. 2. Specifications.
The following specifications apply to each of the warning symbols:
A. The symbol must be
diamond-shaped, 2-1/2 inches in height, and four inches in width at its highest
and widest points respectively.
B.
The letters and border must be silver in color.
C. The background must be black in
color.
D. The letters within the
symbol must be a minimum of one inch in height.
E. The entire symbol, including letters,
background, and border, must be made of reflectorized material and not fade or
wash away when exposed to weather or other adverse elements.
Statutory Authority: MS s 169.762; 299F.011; 326B.02
Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
