Minnesota Administrative Rules
Agency 171 - Public Safety Department
Chapter 7511 - FIRE CODE
Part 7511.2404 - SECTION 2404, SPRAY FINISHING
Universal Citation: MN Rules 7511.2404
Current through Register Vol. 48, No. 39, March 25, 2024
IFC section 2404.2 is amended to read:
2404.2 Location of spray-finishing operations. Spray-finishing operations conducted in buildings used for Group A, E, I, or R occupancies shall be located in a spray room protected with an approved automatic sprinkler system installed in accordance with Section 903.3.1.1 and separated vertically and horizontally from other areas in accordance with the International Building Code. In other occupancies, spray-finishing operations shall be conducted in a spray room, spray booth, or spraying space approved for such use.
Exceptions:
1. Automobile undercoating spray operations
and spray-on automotive lining operations conducted in areas with approved
natural or mechanical ventilation shall be exempt from the provisions of
Section 2404 when approved and where utilizing Class IIIA or IIIB combustible
liquids.
2. In buildings other than
Group A, I, or R occupancies, approved limited spraying space in accordance
with Section 2404.9.
3. Resin
application areas used for manufacturing of reinforced plastics complying with
Section 2409 shall not be required to be located in a spray room, spray booth,
or spraying space.
Statutory Authority: MS s 326B.02
Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
