Minnesota Administrative Rules
Agency 171 - Public Safety Department
Chapter 7450 - WHEELCHAIR SAFETY DEVICES
Part 7450.0300 - FRAME-ATTACHED WHEELCHAIR SECUREMENT

Universal Citation: MN Rules 7450.0300

Current through Register Vol. 48, No. 39, March 25, 2024

Subpart 1. Sufficient strength.

A frame-attached securement device must be of sufficient strength to prevent forward, backward, lateral, or vertical movement of the wheelchair when the device is engaged and the vehicle is in motion, accelerating, or braking.

Subp. 2. Attached to frame.

A frame-attached wheelchair securement device must attach to the frame of the wheelchair without damaging the frame. "Damage" includes effects harmful to the strength, integrity, or serviceableness of the wheelchair, but does not include minor dents, scratches, or other cosmetic blemishes not materially affecting serviceableness.

Subp. 3. Limitation.

A frame-attached wheelchair securement device must not be attached to a wheel of a wheelchair.

Statutory Authority: MS s 299A.01; 299A.12; 299A.18

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.