Minnesota Administrative Rules
Agency 167 - Pollution Control Agency
Chapter 7083 - SSTS CREDENTIALING AND PRODUCT REGISTRATION
LICENSING AND CERTIFICATION
Part 7083.2040 - TRANSITIONING EXISTING REGISTRATIONS AND LICENSES

Universal Citation: MN Rules 7083.2040

Current through Register Vol. 49, No. 13, September 23, 2024

Subpart 1. Designers.

A business licensed, and an individual registered, as a designer I or designer II on February 4, 2008, are reclassified as basic designers. A business reclassified as a basic designer under this chapter is authorized to design all types and sizes of SSTS until February 4, 2012. After that time, a business designing systems described under part 7083.0740, subpart 1, item B, must meet the requirements of this chapter.

Subp. 2. Inspectors.

A business licensed, and an individual registered, as a designer I or inspector on February 4, 2008, are reclassified as basic inspectors. A business or individual reclassified as an inspector under this chapter is authorized to inspect all types of SSTS until February 4, 2012. After that time, the business or government employee inspecting systems described under part 7083.0740, subpart 1, item B, must meet the requirements of this chapter.

Subp. 3. Maintainers.

A business licensed, and an individual registered, as a pumper on February 4, 2008, is reclassified as a maintainer under this chapter.

Subp. 4. Service provider.

To gain a service provider license or certification, a business or individual must meet the requirements of this chapter. An ISTS licensed business or a certified individual providing management services before February 4, 2008, is authorized to operate an SSTS until February 4, 2012, without a service provider license. After February 4, 2012, businesses and individuals providing SSTS management services must meet the requirements of this chapter.

Subp. 5. Basic and continuing education.

Designer I's or designer II's on February 4, 2008, who take training to upgrade to an advanced designer by February 4, 2011, shall have their training hours credited as fulfilling the continuing education hours specified in part 7083.1060. Designer I's or inspectors on February 4, 2008, who take training to upgrade to an advanced inspector by February 4, 2011, shall have their training hours credited as fulfilling the continuing education hours specified in part 7083.1060.

Statutory Authority: MS s 115.03; 115.55

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.