Minnesota Administrative Rules
Agency 167 - Pollution Control Agency
Chapter 7080 - INDIVIDUAL SUBSURFACE SEWAGE TREATMENT SYSTEMS
Part 7080.2020 - TANK IDENTIFICATION
Universal Citation: MN Rules 7080.2020
Current through Register Vol. 49, No. 13, September 23, 2024
A. Sewage tanks must be marked near the outlet with:
(1) the manufacturer's name;
(2) model number;
(3) liquid capacity;
(4) date of manufacture; and
(5) maximum depth of burial.
B. The tank manufacturer or manufacturer's agent shall provide the information in item A to the installer in writing.
C. The tank inlet or outlet must be clearly marked.
D. The installer shall submit the information in item A with the as-built drawing.
Statutory Authority: MS s 115.03; 115.55
Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
