Minnesota Administrative Rules
Agency 167 - Pollution Control Agency
Chapter 7030 - NOISE POLLUTION CONTROL
GENERALLY
Part 7030.0060 - MEASUREMENT METHODOLOGY
Current through Register Vol. 49, No. 13, September 23, 2024
Subpart 1. Measurement location.
Measurement of sound must be made at or within the applicable NAC at the point of human activity which is nearest to the noise source. All measurements shall be made outdoors.
Subp. 2. Equipment specifications.
All sound level measuring devices must meet Type O, I, II, or S specifications under American National Standards Institute S1.4-1983.
Subp. 3. Calibration.
All sound level measuring devices must, at a minimum, be externally field calibrated before and after monitoring using a calibration device of known frequency and sound pressure level.
Subp. 4. Measurement procedures.
The following procedures must be used to obtain representative sound level measurements:
Subp. 5. Data documentation.
A summary sheet for all sound level measurements shall be completed and signed by the person making the measurements. At a minimum, the summary sheet shall include:
Statutory Authority: MS s 116.07