Minnesota Administrative Rules
Agency 167 - Pollution Control Agency
Chapter 7011 - STANDARDS FOR STATIONARY SOURCES
SECONDARY BRASS AND BRONZE INGOT PRODUCTION PLANTS
Part 7011.1900 - DEFINITIONS

Universal Citation: MN Rules 7011.1900

Current through Register Vol. 49, No. 13, September 23, 2024

Subpart 1. Scope.

As used in parts 7011.1900 to 7011.1915, the following words shall have the meanings defined herein.

Subp. 2. Blast furnace.

"Blast furnace" means any furnace used to recover metal from slag.

Subp. 3. Brass or bronze.

"Brass or bronze" means any metal alloy containing copper as its predominant constituent, and lesser amounts of zinc, tin, lead, or other metals.

Subp. 4. Brass or bronze ingot production plant.

"Brass or bronze ingot production plant" means any facility producing brass or bronze from a copper alloy-bearing scrap material by smelting to the metallic form.

Subp. 5. Electric furnace.

"Electric furnace" means any furnace which uses electricity to produce over 50 percent of the heat required in the production of refined brass or bronze.

Subp. 6. Reverberatory furnace.

"Reverberatory furnace" includes the following types of reverberatory furnaces: stationary, rotating, rocking, and tilting.

Statutory Authority: MS s 116.07

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.