Minnesota Administrative Rules
Agency 167 - Pollution Control Agency
Chapter 7011 - STANDARDS FOR STATIONARY SOURCES
INDUSTRIAL PROCESS EQUIPMENT
Part 7011.0720 - PERFORMANCE TEST METHODS

Universal Citation: MN Rules 7011.0720

Current through Register Vol. 49, No. 13, September 23, 2024

Unless another method is approved by the agency, any owner or operator required to submit performance tests for any industrial process equipment must use the following test methods to demonstrate compliance:

A. Method 1 for sample and velocity traverses;

B. Method 2 for velocity and volumetric flow rate;

C. Method 3 for gas analysis;

D. Method 5 for the concentration of filterable particulate matter and associated moisture content and Method 202 for the concentration of organic condensables; and

E. Method 9 for visual determination of the opacity of emissions from stationary sources.

Statutory Authority: MS s 116.07

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.