Minnesota Administrative Rules
Agency 167 - Pollution Control Agency
Chapter 7011 - STANDARDS FOR STATIONARY SOURCES
INDIRECT HEATING FOSSIL-FUEL-BURNING EQUIPMENT
Part 7011.0540 - DERATE
Current through Register Vol. 49, No. 13, September 23, 2024
The owner or operator of indirect heating equipment who elects to achieve compliance with an applicable standard of performance by derating must:
A. advise the commissioner in writing of the intent to achieve compliance by derating and the capacity level at which the owner or operator intends to operate this equipment;
B. agree to a permit condition in the required operating permit that prohibits operating the equipment over the derate level;
C. install a boiler steam flow meter to continuously record, indicate, and integrate boiler steam flow, and must:
D. submit an effective method of physical limitation of boiler load for approval by the commissioner before authorization of a boiler derate. The limitation may include a tieback signal from the steam flow meter to the combustion control system cutting back fuel input at the derate load, a maximum limit stop on the fuel input control drive or valve, or other equivalent physical means.
Statutory Authority: MS s 116.07