Minnesota Administrative Rules
Agency 167 - Pollution Control Agency
Chapter 7011 - STANDARDS FOR STATIONARY SOURCES
INCINERATORS
Part 7011.1315 - MONITORING OF OPERATIONS
Universal Citation: MN Rules 7011.1315
Current through Register Vol. 49, No. 13, September 23, 2024
The owner or operator of any sewage sludge incinerator shall:
A. Install, calibrate, maintain, and operate a flow measuring device which can be used to determine either the mass or volume of sludge charged to the incinerator. The flow measuring device shall have an accuracy of plus or minus five percent over its operating range.
B. Provide access to the sludge charged so that a well-mixed representative grab sample of the sludge can be obtained.
Statutory Authority: MS s 116.07
Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
