Minnesota Administrative Rules
Agency 167 - Pollution Control Agency
Chapter 7009 - AMBIENT AIR QUALITY STANDARDS
AMBIENT AIR QUALITY STANDARDS
Part 7009.0060 - MEASUREMENT METHODOLOGY FOR HYDROGEN SULFIDE

Universal Citation: MN Rules 7009.0060
Current through Register Vol. 49, No. 13, September 23, 2024

For hydrogen sulfide, measurements made to determine compliance with the standards shall be performed in accordance with any measurement method approved by the commissioner. The commissioner shall approve a measurement method where the sensitivity, precision, accuracy, response time, and interference levels of the method are comparable to that of the measurement methods for the other pollutants described in part 7009.0050; and when the person seeking to take the measurement has developed and submitted to the agency a quality assurance plan that provides operational procedures for each of the activities described in Code of Federal Regulations, as amended, title 40, part 58, appendix A.2.2, Quality Assurance Requirements for State and Local Air Monitoring Stations.

Statutory Authority: MS s 116.07

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.