Minnesota Administrative Rules
Agency 151 - Labor and Industry Department
Chapter 5221 - FEES FOR MEDICAL SERVICES
Part 5221.4020 - DETERMINING FEE SCHEDULE PAYMENT LIMITS
Current through Register Vol. 49, No. 13, September 23, 2024
Subpart 1. [Repealed, 35 SR 227 40 SR 328; 44 SR 412 effective 10/1/2019]
Subp. 1a. [Repealed, 35 SR 227 40 SR 328; 44 SR 412 effective 10/1/2019]
Subp. 1b. Conversion factors and maximum fee formulas.
the Work RVU is as shown in column F;
the Nonfacility PE RVU is as shown in column G;
the Facility PE RVU is as shown in column I; and
the Malpractice RVU is as shown in column K.
Subp. 1c. Sample calculation.
The following is a sample calculation for determining the maximum fee, excluding any applicable adjustments in parts 5221.4030 to 5221.4061, for a new patient office examination between 15 and 29 minutes (procedure code 99202) in a clinic based on the 2022 National Physician Fee Schedule Relative Value July Release:
.93 [Work RVU (.93) * Work Geographic PCI (1)]
+ 1.1346 [Nonfacility PE RVU (1.12) * PE GPCI (1.013)]
+ .0318 [MP RVU (.09) * MP GPCI (.353)]
= 2.0964 [Total RVU]
* $60.00 [Conversion factor for example only]
= $125.784 [Maximum fee]
= $125.78 [Maximum fee, rounded]
Subp. 2. [Repealed, 35 SR 227 44 SR 412 effective 10/1/2019]
Subp. 2a. Key to abbreviations and terms and payment instructions.
Columns A to AE are found in the tables in the Medicare National Physician Fee Schedule Relative Value File most recently incorporated by reference by the commissioner by publishing in the State Register pursuant to Minnesota Statutes, section 176.136, subdivision l. These columns list indicators necessary to determine the maximum fee for the service. Further payment adjustments may apply as specified in this subpart.
Indicator "0" indicates physician service codes. This indicator identifies codes that describe physician services such as office visits, consultations, and surgical procedures. The concept of PC/TC does not apply to codes with this indicator since physician services cannot be split into professional and technical components. Modifiers 26 and TC cannot be used with these codes. The RVUs include values for physician work, practice expense, and malpractice expense. There are some codes with no work RVUs.
Indicator "1" identifies codes for diagnostic tests. Codes with this indicator have both a professional and technical component. Modifiers 26 and TC can be used with these codes. The total RVUs for codes reported with a 26 modifier include values for physician work, practice expense, and malpractice expense. The total RVUs for codes reported with a TC modifier include values for practice expense and malpractice expense only. The total RVUs for codes reported without a modifier include values for physician work, practice expense, and malpractice expense.
Indicator "2" indicates professional component only codes. This indicator identifies stand-alone codes that describe the physician work portion of selected diagnostic tests for which there is an associated code that describes the technical component of the diagnostic test only, and another associated code that describes the global test. An example of a professional component only code is CPT code 93010, electrocardiogram; interpretation and report. Modifiers 26 and TC cannot be used with these codes. The total RVUs for professional component only codes include values for physician work, practice expense, and malpractice expense.
Indicator "3" indicates technical component only codes. This indicator identifies stand-alone codes that describe the technical component, such as staff and equipment costs, of selected diagnostic tests for which there is an associated code that describes the professional component of the diagnostic test only. An example of a technical component only code is CPT code 93005, electrocardiogram; tracing only, without interpretation and report. A "3" indicator also identifies codes that are covered only as diagnostic tests and therefore do not have a related professional code. Modifiers 26 and TC cannot be used with these codes. The total RVU for technical component only codes includes values for practice expense and malpractice expense only.
Indicator "4" indicates global test only codes. This indicator identifies stand-alone codes that describe selected diagnostic tests for which there are associated codes that describe (a) the professional component of the test only; and (b) the technical component of the test only. Modifiers 26 and TC cannot be used with these codes. The total RVUs for global procedure only codes include values for physician work, practice expense, and malpractice expense. The total RVUs for global procedure only codes equals the sum of the total RVU for the professional component only and technical component only codes combined.
Indicator "5" indicates incident to codes. Indicator "5" is not used in Minnesota workers' compensation.
Indicator "6" indicates laboratory physician interpretation codes. This indicator identifies clinical laboratory codes for which separate payment for interpretations by laboratory physicians may be made. Modifier TC cannot be used with these codes. The total RVU for laboratory physician interpretation codes includes values for physician work, practice expense, and malpractice expense.
Indicator "7" indicates physical therapy services, for which payment may not be made. This indicator is not used in Minnesota workers' compensation.
Indicator "8" indicates physician interpretation codes. This indicator is not used in Minnesota workers' compensation.
Indicator "9" indicates "not applicable." The concept of a professional/technical component does not apply.
Indicator "000" indicates endoscopic or minor procedure with related preoperative and postoperative relative values on the day of the procedure only included in the RVU amount.
Indicator "010" indicates a procedure with preoperative relative values on the day of the procedure and postoperative relative values during a ten-day postoperative period included in the RVU amount.
Indicator "090" indicates major surgery with a one-day preoperative period and a 90-day postoperative period included in the RVU amount.
Indicator "MMM" indicates maternity codes. The usual global period does not apply.
Indicator "XXX" indicates the global surgery package concept does not apply to the code.
Indicator "YYY" indicates the global surgery package concept may apply. If the provider and payor cannot agree to a specified global period, the global period shall be determined by the commissioner or compensation judge. For purposes of indicator "YYY," the global period shall include normal, uncomplicated follow-up care for the procedure.
Indicator "ZZZ" indicates the code is related to a primary service and has the same global period as the primary service. However, it is considered an add-on code and is paid separately.
Indicator <<0>> indicates no payment adjustment rules for multiple procedures apply.
Indicator <<2>> indicates standard payment adjustment rules for multiple procedures apply as provided in part 5221.4035, subpart 5.
Indicator <<3>> indicates special rules for multiple endoscopic/arthroscopic procedures apply as provided in part 5221.4035, subpart 5, item E.
Indicator <<4>>; indicates special rules for multiple diagnostic imaging procedures apply as provided in parts 5221.4035, subpart 5, item F; and 5221.4061, subpart 3.
Indicator <<5>> indicates special rules for multiple therapy services apply as provided in parts 5221.4035, subpart 5, item G; 5221.4051; and 5221.4061.
Indicator <<6>> indicates special rules for multiple diagnostic cardiovascular services apply as provided in part 5221.4035, subpart 5, item H.
Indicator <<7>> indicates special rules for multiple diagnostic ophthalmology services apply as provided in part 5221.4035, subpart 5, item I.
Indicator<<9>> indicates that the concept of multiple procedures does not apply, except as otherwise provided in parts 5221.4051, subpart 2; and 5221.4061, subpart la.
Indicator "0" indicates that no payment adjustments apply to bilateral procedures.
Indicator "1" indicates that bilateral payment adjustments apply.
Indicator "2" indicates no further bilateral payment adjustments apply.
Indicator "3" indicates that no bilateral payment adjustments apply.
Indicator "9" indicates that the concept of bilateral procedures does not apply.
Indicator "0" indicates an assistant-at-surgery may not be paid unless supporting documentation is submitted to establish medical necessity, in which case payment is made according to part 5221.4035, subpart 7.
Indicator "1" indicates an assistant-at-surgery may not be paid.
Indicator "2" indicates that an assistant-at-surgery may be paid according to part 5221.4035, subpart 7.
Indicator "9" indicates that the concept of assistant-at-surgery does not apply.
Indicator "0" indicates cosurgeons are not permitted for this procedure and no payment for a cosurgeon may be made.
Indicator "1" indicates cosurgeons may be paid, with supporting documentation establishing the medical necessity of two surgeons for the procedure. Where necessity is established, payment is made according to part 5221.4035, subpart 8.
Indicator "2" indicates cosurgeons are paid according to part 5221.4035, subpart 8.
Indicator "9" indicates that the concept of cosurgeons does not apply.
Indicator "0" indicates team surgeons are not permitted for this procedure and no payment may be made for team surgeons.
Indicator "1" indicates team surgeons may be paid, if supporting documentation establishes medical necessity of a team. The maximum fee for the service is limited by part 5221.0500, subpart 2, items B to F, and Minnesota Statutes, section 176.136, subdivision 1b.
Indicator "2" indicates team surgeons are permitted. The maximum fee for the service is limited by part 5221.0500, subpart 2, items B to F, and Minnesota Statutes, section 176.136, subdivision 1b.
Indicator "9" indicates that the concept of team surgery does not apply.
Indicator "99" indicates the concept does not apply.
Subp. 3. Supplies, separate billing allowed.
Except as otherwise provided in subpart 2a, charges for the following supplies provided during an evaluation and management service in the office may be billed separately and paid according to the maximum fee established by the formula in subpart 1b if positive RVUs are assigned or, if no positive RVUs are assigned, the charges are limited by part 5221.0500, subpart 2:
Subp. 4. Codes 99455 and 99456.
The CPT manual describes two codes for "Work Related or Medical Disability Evaluation Services" (codes 99455 and 99456). These codes are used to report evaluations performed to establish baseline information prior to life or disability insurance certificates being issued. They are not to be used for reporting services for treatment or evaluation of a compensable work injury under parts 5221.0410 and 5221.0420 or Minnesota Statutes, chapter 176.
Statutory Authority: MS s 14.38; 14.386; 14.388; 175.171; 176.101; 176.135; 176.1351; 176.136; 176.231; 176.83