Minnesota Administrative Rules
Agency 151 - Labor and Industry Department
Chapter 5207 - STANDARDS FOR CONSTRUCTION
VEHICLES
Part 5207.0900 - POWERED INDUSTRIAL TRUCK OPERATIONS

Universal Citation: MN Rules 5207.0900

Current through Register Vol. 49, No. 13, September 23, 2024

Subpart 1. Restricted use.

All industrial trucks designed and constructed solely for use on solid hard level surfaces shall be restricted to such operations.

Subp. 2. Surface condition.

All solid hard level surfaces must be free of cracks, irregularities, or holes that could upset the balance of the industrial truck.

Subp. 3. Load positioning.

When a fork truck operator is positioning a load in an area that is not fully visible to the fork truck operator, the operator shall be assisted by a designated person who shall direct the safe placing of the load by using predetermined signals.

Statutory Authority: MS s 182.655

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.