Minnesota Administrative Rules
Agency 151 - Labor and Industry Department
Chapter 1346 - MINNESOTA MECHANICAL AND FUEL GAS CODES
MINNESOTA FUEL GAS COD
Part 1346.5101 - ADMINISTRATION
Current through Register Vol. 49, No. 13, September 23, 2024
Subpart 1. Scope.
This code shall apply to the installation of fuel gas piping systems, fuel gas appliances, gaseous hydrogen systems, and related accessories in accordance with this code.
Subp. 2. Gaseous hydrogen systems.
Gaseous hydrogen systems shall be regulated by IFGC chapter 7, as amended.
Subp. 3. Piping systems.
This code applies to piping systems for natural gas with an operating pressure of 125 pounds per square inch gauge (psig) (862 kPa gauge) or less, and for LP-gas with an operating pressure of 20 psig (140 kPa gauge) or less, except as provided in IFGC section 402.6.1. Coverage shall extend from the point of delivery to the outlet of the appliance shutoff valves. Piping system requirements shall include design, materials, components, fabrication, assembly, installation, testing, inspection, operation, and maintenance.
Subp. 4. Gas appliances.
This code applies to gas appliances and related accessories on the side of the meter that supply gas to the building piping system and shall include installation, combustion, and ventilation air and venting and connections to piping systems.
Subp. 5. Systems, appliances, and equipment outside the scope.
This code shall not apply to the following:
Subp. 6. Other fuels.
The requirements for the design, installation, maintenance, alteration, and inspection of mechanical systems operating with fuels other than fuel gas shall be regulated by the Minnesota Mechanical Code, parts 1346.0050 to 1346.1500.
Statutory Authority: MS s 326B.02; 326B.101; 326B.106; 326B.13