Minnesota Administrative Rules
Agency 151 - Labor and Industry Department
Chapter 1322 - RESIDENTIAL ENERGY CODE
Part 1322.0303 - SECTION R303, MATERIALS, SYSTEMS, AND EQUIPMENT

Universal Citation: MN Rules 1322.0303

Current through Register Vol. 49, No. 13, September 23, 2024

Subpart 1. Section R303.1.

IECC section R303.1 is amended to read as follows:

R303.1 Identification. Materials, systems, and equipment shall be identified in a manner that will allow a determination of compliance with the applicable provisions of this code. Materials used shall be:
(1) listed for the intended use;

(2) installed in accordance with the manufacturers installation instructions; and

(3) installed by an installer who is certified by a manufacturer to install that specific product, if such certification exists. (Subsections R303.1.1, R303.1.1.1, R303.1.2, R303.1.3, and R303.1.4 still apply.)

Subp. 2. Section R303.1.5.

IECC section R303.1 is amended by adding a subsection to read as follows:

R303.1.5 Minnesota thermal insulation standards. Thermal insulation shall comply with Minnesota Rules, chapter 7640, Minnesota Thermal Insulation Standards, adopted by the Department of Commerce.

Statutory Authority: MS s 326B.02; 326B.101; 326B.106

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.