Minnesota Administrative Rules
Agency 151 - Labor and Industry Department
Chapter 1307 - ELEVATORS AND RELATED DEVICES
Part 1307.0035 - INSPECTION, TESTS, AND APPROVALS

Universal Citation: MN Rules 1307.0035

Current through Register Vol. 48, No. 39, March 25, 2024

Subpart 1. Approval of plans.

Any person, firm, or corporation desiring to install, relocate, alter, or remove any installation covered by this chapter must obtain approval for doing so from the authority having jurisdiction. Two sets of drawings and/or specifications showing the installation, relocation, alteration, or removal must be submitted as required by the authority having jurisdiction. corporation desiring to install, relocate, alter, or remove any installation covered by this chapter must obtain approval for doing so from the authority having jurisdiction. Two sets of drawings and/or specifications showing the installation, relocation, alteration, or removal must be submitted as required by the authority having jurisdiction.

Subp. 2. Inspections and tests.

No person, firm, or corporation may put into service any installation covered by this chapter whether the installation is newly installed, relocated, or altered materially, without the installation being inspected and approved by the authority having jurisdiction. The installer of any equipment included in this chapter must request inspections by notifying the authority having jurisdiction to schedule a date and time for inspection. The authority having jurisdiction shall require tests as described in the applicable ASME Code to prove the safe operation of the installation.

Subp. 3. Approval.

A certificate or letter of approval shall be issued by the authority having jurisdiction for equipment governed by ASME A17.1/CSA B44-2016, ASME A17.3-2015, ASME A90.1-2015, and ASME B20.1-2015 when the entire installation is completed in conformity with this code.

Subp. 4. Limited use approval.

When a building or structure is equipped with one or more elevators, at least one of the elevators may be approved for limited use before completion of the building or structure. The limited use approval must specify the class of service permitted and the conditions of approval.

Statutory Authority: MS s 16B.59 to 16B.75; 326B.101 to 326B.194

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.