Minnesota Administrative Rules
Agency 151 - Labor and Industry Department
Chapter 1305 - ADOPTION OF INTERNATIONAL BUILDING CODE
Part 1305.1904 - SECTION 1904, DURABILITY REQUIREMENTS
Universal Citation: MN Rules 1305.1904
Current through Register Vol. 49, No. 13, September 23, 2024
IBC section 1904.3 is amended to read as follows:
1904.3 Corrosion protection. Where bonded reinforcing and pre-stressing steel is located in concrete assigned to Exposure Class F3 or Exposure Class C2, the steel shall be protected from corrosion by one of the following methods:
1. impermeable barrier;
2. epoxy coating in accordance with ACI 318;
or
3. hot dipped galvanizing in
accordance with ACI 318.
Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
