Minnesota Administrative Rules
Agency 144 - Health Department
Chapter 4727 - EXPLORERS AND EXPLORATORY BORINGS
Part 4727.0150 - INCORPORATION BY REFERENCE AND ABBREVIATIONS

Universal Citation: MN Rules 4727.0150

Current through Register Vol. 49, No. 13, September 23, 2024

This part lists documents, specifications, and standards that are incorporated by reference in this chapter The material is not subject to frequent change and is available for loan or inspection through the Minitex interlibrary loan system. The abbreviations listed in parentheses after the source names are used in this chapter

A. Dictionary of Geological Terms (Robert L. Bates and Julia A. Jackson, eds., 3d ed. 1984).

B. American Petroleum Institute (API), distributed by Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112-5776:

(1) API Specification 13A, "Oil Well Drilling Fluid Materials," 11th Edition, July 1985 and Supplement One to the 11th Edition; and

(2) API Specification 5L, "Line Pipe" (May 31, 1985).

C. American National Standards Institute (ANSI), 1819 L Street NW, Suite 600, Washington, DC 20036:

(1) ANSI Schedule 5 and Schedule 40, "Dimensions of Welded and Stainless Steel Pipe" as contained in the appendix to ASTM Standard A312-86a; and

(2) ANSI Standard Z34.1-1987, "Third-Party Certification Program."

D. ASTM International (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959:

(1) ASTM Standard A53-90b, "Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless";

(2) ASTM Standard A589-89a, "Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe," specifications for Type I, II, and III only;

(3) ASTM Standard A312-86a, "Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipe," including the appendix;

(4) ASTM Standard C150-85a, "Standard Specification for Portland Cement";

(5) ASTM Standard C494-86, "Standard Specification for Chemical Admixtures for Concrete";

(6) ASTM Standard C595, "Standard Specification for Blended Hydraulic Cements";

(7) ASTM Standard D2466-90a, "Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40";

(8) ASTM Standard D2487-85, "Standard Test Method for Classification of Soils for Engineering Purposes"; and

(9) ASTM Standard F480-88, "Standard Specification for Thermoplastic Water Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR)."

E. Canadian Standards Association (CSA), 178 Rexdale Boulevard, Toronto, Ontario, M9W 1R3, Canada: "Diamond Core Drilling Equipment - General," CSA Standard M253.1 - M1981.

F. Diamond Core Drill Manufacturers Association, Inc., DCDMA Technical Manual (1991).

G. NSF International (NSF), 789 Dixboro Road, Ann Arbor, Michigan 48113:

(1) NSF Standard 14-1990, "Plastic Piping System Components and Related Materials";

(2) NSF Standard 60-1988, "Drinking Water Treatment Chemicals - Health Effects"; and

(3) NSF Standard 61-1991, "Drinking Water System Components - Health Effects."

H. George Austin, "Paleozoic Lithostratigraphy of Southeastern Minnesota," in Geology of Minnesota: A Centennial Volume in Honor of George M. Schwartz (P.K. Sims and G.B. Morey eds., 1972), pages 459 to 473.

I. United States Bureau of Plant Industry, Soils and Agricultural Engineering, Soil Survey Manual, United States Department of Agriculture Handbook, no. 18 (1951), pages 205 to 213.

Statutory Authority: MS s 103I.101

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.