Current through Register Vol. 49, No. 13, September 23, 2024
This part indicates documents, specifications, and standards
that are incorporated by reference in this chapter This material is not subject
to frequent change and is available from the source listed, for loan or
inspection from the Minnesota Department of Health, or through the Minitex
interlibrary loan system. To borrow or inspect a reference, e-mail the
Minnesota Department of Health Well Management section at
health.wells@state.mn.us, or go to Search Minnesota Department of Health
Library and Beyond (www.minnesotadepartmentofhealthlibrary.on.worldcat.org/discovery).
The abbreviations listed in parenthesis after the source name are used in this
chapter
A. American Association of
State Highway and Transportation Officials (AASHTO), 341 National Press
Building, Washington, D.C. 20004.
(1) AASHTO
Standard H20-44, "Standard Specifications for Highway Bridges," 17th Edition,
2002, part 3.7.2.
(2) AASHTO
Standard M306-04, "Standard Specification for Drainage, Sewer, Utility, and
Related Castings."
B.
American Petroleum Institute (API), 1220 L Street Northwest, Washington, DC
20005-4070.
(1) Specification 13A-04, "API
Specification for Drilling Fluid Materials," 16th Edition.
(2) API Standard 5L-04, "Specification for
Line Pipe."
C. American
National Standards Institute (ANSI), 25 West 43rd Street, New York, New York
10036.
ANSI Schedule 5 and Schedule 40, "Dimensions of Welded and
Stainless Steel Pipe" as contained in ASA Standard B36.19-1965, "Welded and
Seamless Wrought Steel Pipe."
D. American Society of Mechanical Engineers,
ASME International, Three Park Avenue, New York, NY 10016-5990, USA, ASME
B36.10M-2000, "Welded and Seamless Wrought Steel Pipe."
E. ASTM International, 100 Barr Harbor Drive,
West Conshohocken, PA 19428-2959.
(1) ASTM
A53/A53M-04a, "Standard Specifications for Pipe, Steel, Black and Hot-Dipped,
Zinc-Coated Welded and Seamless."
(2) ASTM A589-96 (2001), Types I, II, and
III, "Standard Specification for Seamless and Welded Carbon Steel Water-Well
Pipe."
(3) ASTM A312/A312M-04b,
"Standard Specification for Seamless, Welded, and Heavily Cold Worked
Austenitic Stainless Steel Pipes."
(4) ASTM C150-04a, "Standard Specification
for Portland Cement."
(5) ASTM
C494/C494M-04, "Standard Specification for Chemical Admixtures for
Concrete."
(6) ASTM C595, "Standard
Specification for Blended Hydraulic Cements."
(7) ASTM D2466-02, "Standard Specification
for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40."
(8) ASTM D2487-00, "Standard Classification
of Soils for Engineering Purposes (Unified Soil Classification
System)."
(9) ASTM D2683-14,
"Standard Specification for Socket-Type Polyethylene Fittings for Outside
Diameter-Controlled Polyethylene Pipe and Tubing."
(10) ASTM D3035-15, "Standard Specification
for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside
Diameter."
(11) ASTM F480-02,
"Standard Specification for Thermoplastic Water Well Casing Pipe and Couplings
Made in Standard Dimension Ratios (SDR), SCH 40, and SCH 80."
(12) ASTM F714-13, "Standard Specification
for Polyethylene (PE) Pipe (DR-PR) Based on Outside Diameter."
(13) ASTM F876-20, "Standard Specification
for Crosslinked Polyethylene (PEX) Tubing."
(14) ASTM F877-20, "Standard Specification
for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution
Systems."
(15) ASTM F1055-16,
"Standard Specification for Electrofusion Type Polyethylene Fittings for
Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX)
Pipe and Tubing."
(16) ASTM
F1807-19b, "Standard Specification for Metal Insert Fittings Utilizing a Copper
Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked
Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT)
Tubing."
(17) ASTM F1960-19a,
"Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings
for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised
Temperature (PE-RT) Tubing."
(18)
ASTM F2080-19, "Standard Specification for Cold-Expansion Fittings with Metal
Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9
Polyethylene of Raised Temperature (PE-RT) Pipe."
(19) ASTM F2620-19, "Standard Practice for
Heat Fusion Joining of Polyethylene Pipe and Fittings."
F. American Water Works Association, 6666
West Quincy Avenue, Denver, CO 80235, ANSI/AWWA C219-01, "Bolted, Sleeve-Type
Couplings for Plain-End Pipe."
G.
National Fire Protection Association, 1 Batterymarch Park, P.O. Box 9101,
Quincy, MA 02269-9101, NFPA 30, "Flammable and Combustible Liquids Code, 2015
Edition."
H. NSF International, 789
Dixboro Road, P.O. Box 130140, Ann Arbor, Michigan 48113.
(1) ANSI/NSF 14-2003, "Plastics Piping System
Components and Related Materials."
(2) ANSI/NSF 60-2018, "Drinking Water
Treatment Chemicals - Health Effects."
(3) ANSI/NSF 61-2003e, "Drinking Water System
Components - Health Effects."
(4)
NSF White BookTM - Nonfood Compounds Listing
Directory.
I. Sims, PK.
and Morey, G.B., "Geology of Minnesota: A Centennial Volume," pages 459-473,
"Paleozoic Lithostratigraphy of Southeastern Minnesota" by George Austin,
1972.
J. United States Department
of Agriculture, Agricultural Handbook Number 18, Soil Survey Manual pages 136
to 140, October 1993.
Statutory Authority: MS s
103I.101;
103I.111;
103I.205;
103I.221;
103I.301;
103I.401;
103I.451;
103I.501;
103I.525;
103I.531;
103I.535;
103I.541;
103I.621;
144.05;
144.12;
144.383;
157.04; 157.08; 157.09; 157.13
