Minnesota Administrative Rules
Agency 144 - Health Department
Chapter 4725 - WELLS AND BORINGS
LICENSING AND REGISTRATION
Part 4725.1700 - PLACEMENT OF DECALS AND LICENSE OR REGISTRATION NUMBER

Universal Citation: MN Rules 4725.1700
Current through Register Vol. 49, No. 13, September 23, 2024

A licensee or registrant shall place in a conspicuous location on both sides of each drilling machine or hoist the license or registration number in figures not less than three inches high and 1-1/2 inches wide. The figures must be in a contrasting color to the rest of the machine or hoist. Decals issued by the commissioner designating the year for which the license or registration was issued or renewed must be affixed directly adjacent to and below the license or registration number on each drilling machine or hoist. Contractors using small drilling machines or hoists shall attach their decals on a portable display to be shown at the well or boring site. The decals shall be issued by the commissioner upon licensure or registration and renewal.

Statutory Authority: MS s 103I.101; 103I.111; 103I.205; 103I.221; 103I.301; 103I.401; 103I.451; 103I.501; 103I.525; 103I.531; 103I.535; 103I.541; 103I.621; 144.05; 144.12; 144.383; 156A.01 to 156A.08; 157.04; 157.08; 157.09; 157.13

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.