Minnesota Administrative Rules
Agency 144 - Health Department
Chapter 4720 - PUBLIC WATER SUPPLIES
GENERAL WELLHEAD PROTECTION REQUIREMENTS AND CRITERIA
Part 4720.5540 - AQUIFER TEST PLAN CONTENT

Universal Citation: MN Rules 4720.5540

Current through Register Vol. 49, No. 13, September 23, 2024

An aquifer test plan must be prepared for the wells in a public water supply system and submitted to the department for approval. The aquifer test plan must contain:

A. the state identifier;

B. a map showing the location of the pumping well and the monitoring well or environmental bore hole;

C. the name and address of the public water supplier;

D. the name and address of the person preparing the aquifer test plan;

E. specification of the method used from part 4720.5510, subpart 6;

F. a description of why the method was selected; and

G. the existing data and the calculated transmissivity value, if the method selected is one of those specified in part 4710.5510, subpart 6, item B, subitem (1), (2), (5), (6), or (7).

Statutory Authority: MS s 103I.101

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.