Current through Register Vol. 49, No. 13, September 23, 2024
Subpart 1.
Highly complex or controversial lines.
Any biennial transmission projects report must comply with both
the filing requirements of this chapter and the filing requirements of the
certificate of need rules, parts
7849.0010 to
7849.0400, for certification of
each high-voltage transmission line that (1) has the capability of transmitting
at least 300 kilovolts and has at least 25 miles of its length in Minnesota,
(2) has the capability of transmitting at least 200 kilovolts and has at least
50 miles of its length in Minnesota, or (3) crosses the Minnesota border into
another state or Canada.
Subp.
2.
Filing requirements.
Any biennial transmission projects report that seeks
certification of a high-voltage transmission line in the course of the biennial
transmission report proceeding must include the information listed below for
each high-voltage transmission line proposed:
A. the transmission inadequacies the line is
designed to address and every service area the line would benefit;
B. a detailed description of the line,
including its length, supporting structures, number of phases, types of
conductors, maximum power-carrying capacity for each line segment, projected
load during peak-load conditions, projected line losses during peak-load
conditions and during average conditions, and induced voltages during
operation;
C. a map showing the end
points of the line and existing transmission facilities in the area;
D. a narrative description of the major
features of the region between the end points, emphasizing the area within
three miles of the end points;
E.
the estimated cost of constructing the line and the effect of those costs on
rates;
F. the estimated annual cost
of operating and maintaining the line and the effect of those costs on
rates;
G. a summary of the input
the utility has gathered from local government officials, tribal government
officials, and members of the public on the proposed line;
H. the expected depreciation and service
lives of the line;
I. an analysis
of the effect of the line on service reliability, both within the utility's
assigned service area and throughout the state;
J. an analysis of the economic,
environmental, and social consequences of the line;
K. a description of measures generally
available to mitigate any adverse environmental impacts from the construction,
operation, and maintenance of a transmission line of the size and voltage
proposed and a description of any additional mitigation measures likely to be
required for the proposed line;
L.
a description of right-of-way requirements for the line at the voltage
proposed, a description of land use patterns between the end points, a
discussion of routing considerations that may influence subsequent routing
proceedings, and the best routing information available;
M. an analysis of the feasibility and
cost-effectiveness of remedying, in whole or in part, the transmission
inadequacies the line is designed to address, through any combination of
conservation, energy conservation improvements, and load management
measures;
N. the likely
consequences of not building the line;
O. the energy forecasts or other modeling
upon which the need for the line is based and a description of the methodology
underlying each forecast or model;
P. an account of all promotional activities
that may have contributed to the need for the line;
Q. a list of all other state agencies,
federal agencies, local governments, and tribal governments whose approval of
the proposed line must be obtained for it to proceed, and an analysis of the
line's compliance with their policies, rules, and regulations;
R. an analysis of the likely effects of
present or future energy conservation programs authorized under Minnesota
Statutes, sections
216C.05 and
216C.30,
or other state and federal laws, on long-term energy demand and the long-term
need for the line;
S. an analysis
of the relationship between the line and overall state energy needs, as
described in the most recent state energy policy and conservation report
prepared under Minnesota Statutes, section
216C.18;
T. a list and analysis of all feasible
transmission and nontransmission alternatives to the line, including, but not
necessarily limited to, increasing the efficiency of existing facilities,
upgrading existing facilities, adding new lines of different voltages or
locations, double-circuiting existing lines, rebuilding existing lines, using
distributed generation, using small-scale generation near the load center,
utilizing load management programs, and implementing energy efficiency
programs;
U. a list of all
transmission and nontransmission alternatives to the line that were considered
and rejected as not feasible and the grounds on which they were determined to
be not feasible; and
V. a
discussion of the factors listed in Minnesota Statutes, section
216B.243,
subdivision 3, to the extent that they are not addressed in response to items A
through U.