Minnesota Administrative Rules
Agency 134 - Electricity Board
Chapter 3801 - ELECTRICAL PROCEDURES AND TRAINING
REGULATION OF ELECTRICIANS
Part 3801.3770 - ROUGH-IN INSPECTION OF WIRING TO BE CONCEALED
Universal Citation: MN Rules 3801.3770
Current through Register Vol. 48, No. 39, March 25, 2024
Where wiring is to be concealed, the inspector must be notified sufficiently in advance to permit completion of a rough-in inspection before concealment, exclusive of Saturdays, Sundays, and holidays. In the event wiring is concealed before rough-in inspection without adequate notice having been given to the inspector, the person responsible for having enclosed the wiring shall be responsible for all costs resulting from uncovering and replacing the cover material.
Statutory Authority: MS s 326.241
Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
