Minnesota Administrative Rules
Agency 120 - Commerce Department
Chapter 7601 - WEIGHTS AND MEASURES
UNIFORM NATIONAL CODES
Part 7601.1010 - NIST HANDBOOK 44; COMPLIANCE REQUIRED

Universal Citation: MN Rules 7601.1010

Current through Register Vol. 49, No. 13, September 23, 2024

Subpart 1. Compliance.

A person who owns or operates weighing or measuring equipment for commercial purposes in Minnesota must use weighing and measuring equipment that meets all applicable requirements in NIST Handbook 44 as adopted under part 7601.1000. Only the director, or a department employee delegated by the director, shall determine the applicability of, and compliance with, the requirements of NIST Handbook 44.

Subp. 2. Certification of weighing or measuring equipment.

A person who sells, installs, owns, or operates commercial weighing or measuring equipment manufactured after January 1, 1996, must sell, install, or use only weighing or measuring equipment of a make, model, and type for which a "Certificate of Conformance" has been issued by the National Conference on Weights and Measures (NCWM).

Statutory Authority: MS s 239.06

Disclaimer: These regulations may not be the most recent version. Minnesota may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.