Michigan Administrative Code
Department - Licensing and Regulatory Affairs
Public Service Commission
Technical Standards For Gas Service
Part 5 - METERS METERING EQUIPMENT INSPECTIONS AND TESTS
Section R. 460.2356 - Pressure measurement standards

Universal Citation: MI Admin Code R. 460.2356

Current through Vol. 25-4, March 15, 2025

Rule 56.

(1) For its working pressure measurement standards, a utility shall have manometers, laboratory-quality indicating pressure gauges, field-type deadweight pressure gauges, or any other instruments that have an accuracy error of not more than 1/2 of 1% of full scale, which shall be used to test the indicating and recording pressure gauges that are used in determining the pressure on the utility's system.

(2) For its secondary pressure measurement standards, a utility shall own, or have access to, a pressure-testing instrument that has an accuracy error of not more than 1/10 of 1% of full scale, which shall be used to verify the accuracy of its working pressure measurement standards. An instrument that is used as a secondary pressure measurement standard shall be maintained in an accurate condition.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.