Michigan Administrative Code
Department - Licensing and Regulatory Affairs
Public Service Commission
Michigan Gas Safety Standards
Part 1 - GENERAL PROVISIONS
Section R. 460.20101 - Applicability of rules
Universal Citation: MI Admin Code R. 460.20101
Current through Vol. 24-16, September 15, 2024
Rule 101.
(1) These rules apply to the design, fabrication, installation, inspection, testing, and safety aspects of the operation and maintenance of gas pipeline facilities used in the transportation of gas.
(2) These rules do not apply to either of the following:
(a) The onshore gathering of gas
under either of the following conditions:
(i)
Through a pipeline that operates at less than 0 psig.
(ii) Through a pipeline that is not a
regulated onshore gathering line as determined by
49
C.F.R. §
192.8.
(b) Any pipeline system that transports only
petroleum gas or petroleum gas and air mixtures under either of the following
circumstances:
(i) The pipeline has fewer
than 10 customers and no portion of the system is located in a public
place.
(ii) The pipeline has only 1
customer.
(3) The work performed within the scope of these rules shall meet or exceed all of the safety standards in these rules.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
