Michigan Administrative Code
Department - Licensing and Regulatory Affairs
Bureau of Construction Codes
Manufactured Housing
Part 6 - HOME INSTALLATION
Section R. 125.1605 - Anchoring systems

Universal Citation: MI Admin Code R. 125.1605

Current through Vol. 24-16, September 15, 2024

Rule 605.

(1) A home anchoring system that is sold or manufactured or installed within this state shall be in compliance with all of the following provisions:

(a) Be designed and constructed in compliance with the United States department of housing and urban development standards entitled "Manufactured Home Construction and Safety Standards," which are adopted by reference in R 125.1102 of these rules.

(b) Be installed in compliance with its manufacturer's specifications.

(c) Be approved to be sold and for use within this state by the state construction code commission.

(2) An anchoring system that is sold in this state shall be certified, in writing, by its manufacturer as meeting the standards required by these rules.

(3) An anchoring system manufacturer shall furnish, and ship with each approved anchor system, information pertaining to the type or types of soil the system has been tested and certified to be installed in and instructions as to the method of installation and the periodic maintenance required.

(4) The model number shall be permanently marked on each anchor system.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.