Michigan Administrative Code
Department - Licensing and Regulatory Affairs
Bureau of Construction Codes
Elevator Safety Board
Michigan Elevator Rules
Chapter 1 - GENERAL PROVISIONS
Section R. 408.7005 - Identification plates and tags

Universal Citation: MI Admin Code R. 408.7005

Current through Vol. 24-16, September 15, 2024

Rule 5.

(1) The holder of a certificate of operation shall permanently attach to the elevator in an approved area an identification plate or an engraving in the car operating panel, showing the type, the rated load, and the state-assigned serial number of each elevator. The assignment of a serial number does not automatically make the unit safe for public operation. All units shall be inspected before use pursuant to R 408.7010.

(2) One serial number tag must be furnished and permanently attached to the elevator machine controller.

(3) Identification plates and tags are furnished by the department and remain the property of the department.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.