Michigan Administrative Code
Department - Licensing and Regulatory Affairs
Bureau of Construction Codes
Elevator Safety Board
Michigan Elevator Rules
Chapter 1 - GENERAL PROVISIONS
Section R. 408.7003 - Applicability of national standards
Current through Vol. 24-16, September 15, 2024
Rule 3. The following standards are adopted by reference.
(a) The following standards are available from the American Society of Mechanical Engineers (ASME), 22 Law Drive, Box 2900, Fairfield, New Jersey 07007-2900, https://www.asme.org, at a cost as of the time of adoption of these rules, as stated in this subdivision:
(b) ANSI A10.4-2016, the American National Standards Institute (ANSI), safety requirements for personnel hoist and employee elevators for construction and demolition and operations, except for sections 24.1.2.1 and 26.4.8.1, is available from ANSI at 1430 Broadway, New York, New York, 10018, https://www.ansi.org. Cost $110.00.
(c) The following standards are available from American Society for Testing and Materials, (ASTM), 100 Bar Harbor Drive, 2 Conshohocken, Pennsylvania 19428-2959, at a cost as of the time of adoption of these rules, as stated in this subdivision:
(d) The standards adopted in this subrule are also available for inspection at the Michigan Department of Licensing and Regulatory Affairs, Bureau of Construction Codes, 611 W. Ottawa St., 1st Floor Ottawa Building, Lansing, Michigan 48933. Direction to the organizations' website to order the book may be obtained from the bureau of construction codes. The cost of the individual codes is noted in this subrule.
(e) All references to NFPA 70 mean the current Michigan electrical code. The Michigan electrical code is available for inspection at the Michigan Department of Licensing and Regulatory Affairs, Bureau of Construction Codes 611 W. Ottawa St., 1st Floor Ottawa Building, Lansing, Michigan 48933, at a cost as of the time of adoption of these amendatory rules of $89.50.