Michigan Administrative Code
Department - Licensing and Regulatory Affairs
Bureau of Construction Codes
Construction Code Commission General Rules
Construction Code
Part 11 - PREMANUFACTURED UNITS
Section R. 408.31136 - Manufacturer's data plate
Current through Vol. 24-16, September 15, 2024
Rule 1136.
(1) The following information shall be placed directly on 1 or more permanent manufacturer's data plates in the vicinity of the electrical distribution panel or in some other designated location acceptable to the commission, on the premanufactured unit or building component where it will be readily accessible for inspection:
(2) If, in the opinion of the bureau, the shape or size of a building component is such that the information required in subrule (1) cannot be attached to a component permanently, the information may be placed in a manual crated with the component or on a tag attached to the crate in which the component is shipped, if the information is not such that the future occupant of the building should know it. If the occupant will need to know the information, it shall be contained in a manual which shall be presented to the occupant upon transfer of possession. If life safety is involved, the item in question shall be plainly labeled.