Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 85 - THE CONTROL OF HAZARDOUS ENERGY SOURCES
Section R. 408.18501 - Scope

Universal Citation: MI Admin Code R. 408.18501

Current through Vol. 24-16, September 15, 2024

Rule 8501.

(1) These rules establish minimum requirements for the lockout/tagout of energy sources for the protection of employees, in, on, or around machines, equipment, or a process during repair, maintenance, and associated activities, from injury due to unexpected/unintended motion, energization, start-up, or release of stored energy from the machine, equipment, or process.

(2) Except where the provisions of these rules conflict with specific requirements for the lockout/tagout of energy sources in any other general industry safety standard, the provisions of these rules and the requirements specified in any other general industry safety standard rule shall be deemed to have concurrent application. Where a specific general industry safety standard contains lockout/tagout requirements, the specific provisions set forth in the general industry safety standard shall prevail if there is a conflict with the requirements set forth in these rules.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.