Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 81 - BAKING OPERATIONS
SPECIFIC EQUIPMENT
Section R. 408.18134 - Dividers and depositors

Universal Citation: MI Admin Code R. 408.18134

Current through Vol. 24-16, September 15, 2024

Rule 8134.

(1) A guard at the front of a divider or depositor shall be constructed so that the dough weight can be adjusted without removal of the guard.

(2) A guard at the back of a divider or depositor shall enclose all moving parts. The guard shall be hinged and interlocked with the power source so that the machine will not operate when the enclosure is open.

(3) The oil hole for the knife at the back of a divider shall be of such size that a finger cannot enter the hold.

(4) Any elongated hole in the knife actuating arm on a divider shall be covered with a saddle guard or other protective device.

(5) Start and stop control buttons on a divider or depositor shall be oil-tight and other electrical components shall be either oil-tight or located to prevent the entrance of oil.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.