Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 81 - BAKING OPERATIONS
Section R. 408.18116 - Machine installation

Universal Citation: MI Admin Code R. 408.18116

Current through Vol. 24-16, September 15, 2024

Rule 8116.

(1) Electrically powered machinery and equipment must be grounded.

(2) Stationary type machinery and equipment must be secured to a floor, foundation, bench, table, or stand of such strength and design to prevent overturning or unintentional movement.

(3) Permanent machinery and equipment must not be placed so as to require an operator to stand in an aisle. Temporary equipment must not be placed so as to require an operator to stand in an aisle, unless the employee is protected with a guardrail system in compliance with General Industry Safety and Health Standard Part 2. "Walking-Working Surfaces," as referenced in R 408.18101a.

(4) Machinery or equipment having an access door for body entry must be equipped with a means of opening the door inside and out.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.