Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 74 - FIREFIGHTING
TOOLS
Section R. 408.17442 - Using, covering, or protecting tools
Universal Citation: MI Admin Code R. 408.17442
Current through Vol. 24-16, September 15, 2024
Rule 7442.
(1) Chain saws that are specifically designed for firefighting operations to cut holes in roofs, floors, and walls shall be used where cutting operations are performed. If a chain saw is not in use, then the cutting teeth of the chain saw shall be covered to prevent inadvertent contact.
(2) An axe or other sharp-edged or pointed tool shall be protected when stored or carried on the apparatus. A rounded tipped pike pole is excluded from the requirements of this subrule.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
