Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 71 - LAUNDRY AND DRY CLEANING MACHINERY AND OPERATIONS
SPECIFIC PROVISIONS-LAUNDRY
Section R. 408.17141 - Marking machine and label remover
Universal Citation: MI Admin Code R. 408.17141
Current through Vol. 24-16, September 15, 2024
Rule 7141. A marking machine or label remover with an opening of more than 1/4 inch shall be guarded by 1 of the following:
(a) A spring compression device designed to prevent injury if the fingers are caught between the marking plunger and the platen.
(b) A control device requiring concurrent use of both hands to operate the machine.
(c) A barrier designed to prevent contact with the marking plunger.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
