Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 71 - LAUNDRY AND DRY CLEANING MACHINERY AND OPERATIONS
GENERAL PROVISIONS
Section R. 408.17127 - Relief valves

Universal Citation: MI Admin Code R. 408.17127

Current through Vol. 24-16, September 15, 2024

Rule 7127.

(1) Where a pressure reducing valve is used, not less than 1 relief valve shall be provided adjacent to the reducing valve on the low pressure side.

(2) The relief valve shall vent to an area which will not create a hazard to an employee. The vent shall be the same size as the relief valve outlet and as short and direct as possible.

(3) The combined discharge capacity of relief valves shall be such that the pressure rating of the lower pressure piping and equipment will not be exceeded if the reducing valve should fail to function.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.