Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 7 - GUARDS FOR POWER TRANSMISSION
GUARD DESIGN AND CONSTRUCTION
Section R. 408.10751 - Design
Universal Citation: MI Admin Code R. 408.10751
Current through Vol. 24-16, September 15, 2024
Rule 751.
(1) The design of a guard shall take into consideration:
(a) The nature of protection required of the
guard.
(b) The possibility of guard
failure.
(c) The amount of
maintenance required on the guard.
(2) In a place where it is necessary to change belts, make adjustments, or apply oil or grease, a guard may have hinged sections or be of a removable design. A guard shall be closed or replaced after servicing.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
