Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 65 - MILLS AND CALENDERS FOR RUBBER AND PLASTIC
Section R. 408.16517 - Floors and aisles

Universal Citation: MI Admin Code R. 408.16517

Current through Vol. 24-16, September 15, 2024

Rule 6517.

(1) An aisle or floor area around a mill or calender shall be maintained free of protruding objects, holes, oil, grease, and accumulations of water.

(2) The surface of a platform or floor area at an operator's work station shall be maintained in slip-resistant condition.

(3) An aisle for combined usage of employees and stock moving equipment shall be 3 feet wider than the widest load moved. The outline of the aisle shall be marked or otherwise identified. When an oversized load is moved, pedestrian traffic shall be warned ahead of the load movement. Where stock moving equipment is not used in an aisle, the aisle shall not be less than 3 feet wide.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.