Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 63 - PULP, PAPER, AND PAPERBOARD MILLS
SPECIFIC PROVISIONS
Section R. 408.16385 - Rotary cutter
Universal Citation: MI Admin Code R. 408.16385
Current through Vol. 24-16, September 15, 2024
Rule 6385.
(1) A single knife rotary cutter shall be guarded to prevent contact with the blade.
(2) On duplex cutters, the protection required for single-knife machines shall be provided for the first knife, and a hood shall be provided for the second knife.
(3) Access to a blade of a rotary cutter shall be provided by means of a catwalk after the machine had been locked out as prescribed in R 408.16323(4).
(4) The nip point at the spreader or squeeze roll shall be guarded as prescribed in R 408.16374(1).
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
