Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 63 - PULP, PAPER, AND PAPERBOARD MILLS
SPECIFIC PROVISIONS
Section R. 408.16355 - Blowing a batch type digester
Universal Citation: MI Admin Code R. 408.16355
Current through Vol. 24-16, September 15, 2024
Rule 6355.
(1) A signal device such as a bell, horn, siren, or light shall be installed in a batch type digester or blow pit room and chip bin and used before and during blowing of the digester.
(2) A signal shall be used to warn an employee in a chip bin before loading the batch type digester.
(3) A blow-off valve shall be opened slowly, and the valve shall be left open until the digester cook signals the blow is completed.
(4) A digester cover shall not be removed until the blow has been completed. An employee removing a digester cover shall wear protective equipment to guard against burns from hot stock and steam.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.