Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 52 - SAWMILLS
SPECIFIC EQUIPMENT
Section R. 408.15242 - Circular head saw
Current through Vol. 24-16, September 15, 2024
Rule 5242.
(1) A circular headsaw shall not be operated at a speed in excess of the manufacturer's rating, which shall be etched on the blade. A circular headsaw shall be equipped with guides to prevent blade wobble.
(2) Horizontal distance from a circular headsaw blade to the nearest vertical husk part shall be at least 1 inch greater than the distance from the blade collar to the tip of the blade.
(3) Behind a circular head saw blade, the saw shall be equipped with a spreader wheel or a splitter.
(4) A splitter shall be constructed of tempered steel or its equivalent and shall not be thinner than the saw kerf.
(5) The work station of an off-bearer shall be constructed to prevent the off-bearer from working closer than 42 inches from the saw blade.
(6) The work station of the operator of a circular saw shall be enclosed as prescribed in R 408.15241(5).
(7) If a circular headsaw has setworks that are manually operated or a carriage that is manually loaded, both of the following provisions shall be complied with: