Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 49 - SLINGS
Section R. 408.14911 - General operating practices
Universal Citation: MI Admin Code R. 408.14911
Current through Vol. 24-16, September 15, 2024
Rule 4911.
(1) Whenever a sling is used, the following practices shall be followed:
(a) A damaged or defective sling, as
described in this standard, shall not be used.
(b) A sling shall not be shortened with
bolts, knots, or other makeshift devices.
(c) Sling legs shall not be kinked.
(d) A sling shall not be loaded in excess of
its rated capacity.
(e) A sling
used in a basket hitch shall have the load balanced to prevent
slipping.
(f) A sling shall be
securely attached to its load.
(g)
A sling, other than an alloy steel chain, shall be padded or protected from the
sharp corners of its load.
(h) A
suspended load shall be kept clear of all obstructions.
(i) An employee shall be kept clear of a
suspended load and a load about to be lifted.
(j) An employee's hand or finger shall not be
placed between the load and sling while the sling is being tightened.
(k) Slack in a sling shall be removed
gradually.
(l) A sling shall not be
pulled from under a load when the load is resting on the sling.
(2) Employers shall not load a sling in excess of its recommended safe working load as prescribed by the sling manufacturer on the identification markings permanently affixed to the sling.
(3) Employers shall not use slings without affixed and legible identification markings.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.