Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 49 - SLINGS
ALLOY STEEL CHAIN SLINGS
Section R. 408.14924 - Safe operating temperatures
Universal Citation: MI Admin Code R. 408.14924
Current through Vol. 24-16, September 15, 2024
Rule 4924. Employers shall permanently remove an alloy steel-chain slings from service if it is heated above 1,000 degrees F. When exposed to service temperatures in excess of 600 degrees F, employers shall reduce the maximum working-load limits permitted by the chain manufacturer in accordance with the chain or sling manufacturer's recommendations.
Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
