Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 44 - FOUNDRIES
Section R. 408.14408 - Definitions; S

Universal Citation: MI Admin Code R. 408.14408

Current through Vol. 24-16, September 15, 2024

Rule 4408.

(1) "Safety factor" means the ratio of the breaking strength of a piece of material or object to the actual load or stress when in use.

(2) "Sampling cone" means a cup with an attached handle used to collect a sample of sand.

(3) "Service" means the repair or adjustment of equipment or machinery.

(4) "Shell or hot box core making" means a process of making cores of sand and resin mix that is cured in a heated box or pattern.

(5) "Shell molding" means a process of making a mold of sand and resin mix and curing on a heated pattern.

(6) "Single stroke mechanism" means a method or device which prevents action or cycling of a part of a machine more than once when the control is continuously held down.

(7) "Slag or dross" means the refuse from melting of metals.

(8) "Smelting" means to separate metals by melting.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.