Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 44 - FOUNDRIES
Section R. 408.14406 - Definitions; D to I

Universal Citation: MI Admin Code R. 408.14406

Current through Vol. 24-16, September 15, 2024

Rule 4406.

(1) "Draw furnace" means a device designed to heattreat or anneal metals.

(2) "Ferrous foundry" means a place where malleable iron, grey iron, nodular iron, or steel or a combination of these metals are melted and poured into molds in the making of castings.

(3) "Footcandles" means a standard measurement of light.

(4) "Foot protection" means a protective cap worn on an employee's foot designed to protect against probable injury.

(5) "Gangway" means a well defined passageway dividing or bordering working areas, but does not include an aisle.

(6)"Interlock" means a device or method of controlling the source of power so that if a guard, gate, or similar protective device is removed or out of place, the equipment becomes inoperative.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.