Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 38 - HAND AND PORTABLE POWERED TOOLS
Section R. 408.13807 - Definitions; P

Universal Citation: MI Admin Code R. 408.13807

Current through Vol. 24-16, September 15, 2024

Rule 3807.

(1) "Platen sander" means a portable powered tool which has abrasive paper fastened to a base or platen which moves in an orbital oscillating motion.

(2) "Pneumatic powered nut runner" means an air operated wrench used to drive a threaded fastener into or onto a work piece.

(3) "Portable powered stapler and nailer," other than general office staplers, means a tool which drives a staple or nail by mechanical, pneumatic or electrical power into a work piece.

(4) "Portable powered tool" means a tool carried and moved by hand and powered by something other than manual force.

(5) "Powder actuated tool" means a device for making instantaneous forced entry into materials by use of a tool, a fastener and an explosive load.

(6) "Protective shield" means a device or guard attached to the muzzle end of a powder actuated tool to confine flying particles.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.