Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 38 - HAND AND PORTABLE POWERED TOOLS
Section R. 408.13805 - Definitions; H

Universal Citation: MI Admin Code R. 408.13805

Current through Vol. 24-16, September 15, 2024

Rule 3805.

(1) "Hammer actuated piston tool" means a device which, when struck by a hammer and supplemented by an explosive load, moves a captive piston to drive a fastener into a work surface.

(2) "Hand tool" means an instrument used or worked by hand.

(3) "High velocity tool" means a device which, when used with an explosive load, propels a fastener at a velocity more than 300 feet per second when measured 6 1/2 feet from the muzzle end of the tool.

(4) "Hoist and puller," sometimes called a come-along, means a portable, manually operated device for lifting, lowering or moving by a pulling force.

(5) "Hot stick" means a dielectric tool extension used when working on energized conductors and apparatus.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.