Michigan Administrative Code
Department - Labor and Economic Opportunity
MIOSHA
General Industry and Construction Safety and Occupational Health Standards
General Industry Safety Standards
Part 38 - HAND AND PORTABLE POWERED TOOLS
POWDER ACTUATED TOOLS
Section R. 408.13872 - Powder-actuated tools generally

Universal Citation: MI Admin Code R. 408.13872

Current through Vol. 24-16, September 15, 2024

Rule 3872.

(1) An employer who uses powder-actuated tools shall establish and maintain, at the place of employment, a list or other record of employees qualified and trained to operate powder-actuated tools of the type provided by the employer.

(2) An employee shall receive training and instruction from 1 of the following:

(a) A dealer or distributor of powder-actuated tools who has been authorized by the tool manufacturer to provide such training.

(b) An authorized employee of a powder-actuated tool manufacturer.

(c) An employer or an authorized employer representative.

(3) A powder-actuated tool which is found not to be in proper working order or which develops a defect during use shall be immediately removed from service, tagged, and not used until repaired. The tag shall be as prescribed in R 408.13731.

(4) The employer shall have a defective powder-actuated tool repaired only by an authorized repair person.

Disclaimer: These regulations may not be the most recent version. Michigan may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.